Me and my girlfriend made the 170 mile drive from Arlington, VA to Davis, WV in under 4 hours. The roads were snow packed and thick in some spots for the last 30 miles with a wicked wind blowing snow and dropping viz down to zero at times. We were driving her SUV, which still had a summer mixture of windshield wiper fluid in it, so it was partially frozen. Thankfully we never had to use it, and after sitting in the sun a few minutes at the Shop-n-Save, it thawed out. I ran it dry and replaced it with -40F (if you plan to be out in this weather run your fluid dry and replace it with at least -0F grade).
We are the only one staying at the Bright Morning B&B in Davis, and the inn keeper had actually emailed us this morning telling us if we didn't want to come, we could get a full refund. Unfortuantly we didn't check email before leaving. It is as cold as a pile of penguin you know what (current temp at 620pm is 1F). , with wind chills -20F. Forecast is for more snow tonight and windchills still well below zero for Monday. But lift tickets are only $18 at Timberline for students (I'm not, but she is getting her MBA), and with a $5 coupon at Canaan, only $26. So we are here, have the joint liteally to ourselves, gonna tie one on at the bar across the street, get up a little late and hit the hill when the chill hopefuly lets up. If it is still wicked on Tuesday, might head for the nordic center and do some x-country in the trees where hopefuly the wind will be less.
Pics to come when we get home on Tuesday, if we last that long.
The End of an Era...We are Shutting Down the Messageboard
The messageboard is now in read-only mode and no new posts or topics can be created. We will leave the messageboard up for historical purposes, but you will not be able to make new posts or comment on existing ones.
We have started a Discord server and hope that you all will join us on there. Technology has changed over the years and maintaining the messageboard has become somewhat of a pain in the butt and Discord offers many features for users, the main one being a very polished mobile app.
We really hope you all will join us on Discord and think you will like the platform. Use the invite link below to join.
https://discord.gg/skisoutheast
The messageboard is now in read-only mode and no new posts or topics can be created. We will leave the messageboard up for historical purposes, but you will not be able to make new posts or comment on existing ones.
We have started a Discord server and hope that you all will join us on there. Technology has changed over the years and maintaining the messageboard has become somewhat of a pain in the butt and Discord offers many features for users, the main one being a very polished mobile app.
We really hope you all will join us on Discord and think you will like the platform. Use the invite link below to join.
https://discord.gg/skisoutheast
Check your wiper fluid!!
-
- Advanced
- Posts: 1456
- Joined: Fri Dec 04, 2009 11:53 am
@skizer 200856 wrote:Had the same problem with the wiper fluid a couple weeks ago. Drivers side froze up but the passenger side worked great, go figure.
I was thinking of leaving a cheap $7 Harbor Frieght heat gun in the glove box for times like this when the nozzles are frozen over. Speaking of which, I just moved form FL and I'm sure my wiper fluid is of the over 32F variety.
I was thinking of leaving a cheap $7 Harbor Frieght heat gun in the glove box for times like this when the nozzles are frozen over. Speaking of which, I just moved form FL and I'm sure my wiper fluid is of the over 32F variety.
-
- Beginner
- Posts: 145
- Joined: Wed Jan 14, 2009 3:00 pm
@Superorb 200923 wrote:I was thinking of leaving a cheap $7 Harbor Frieght heat gun in the glove box for times like this when the nozzles are frozen over. Speaking of which, I just moved form FL and I'm sure my wiper fluid is of the over 32F variety.
The problem is that sometimes it freezes in the reservior or in the lines, which is alot harder to deal with than just in the nozels.
The problem is that sometimes it freezes in the reservior or in the lines, which is alot harder to deal with than just in the nozels.
-
- Advanced
- Posts: 1456
- Joined: Fri Dec 04, 2009 11:53 am
@FaceShot 200985 wrote:The problem is that sometimes it freezes in the reservior or in the lines, which is alot harder to deal with than just in the nozels.
Yeah, if it freezes in the lines you're screwed. My reservoir is easily accessible, but it's made of plastic so it'll melt with too much heat.
Yeah, if it freezes in the lines you're screwed. My reservoir is easily accessible, but it's made of plastic so it'll melt with too much heat.